Front Wheel Speed Sensor
WARNING: This page is about a different car, the 2007 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the tire and wheel assembly.
- Remove the caliper adaptor bolts. Support the caliper and adaptor assembly Do Not let assembly hang by the hose. . Refer to REMOVAL .
- Remove disc brake rotor. Refer to REMOVAL .
- Remove the front wheel sensor mounting nut (2) to the hub (3).
- Remove the wheel speed sensor (1) from the hub (3).
1 - ELECTRICAL CONNECTOR 2 - CLIP - Disconnect the wire sensor routing clips (2).
- Disconnect the wheel speed sensor wire connector (1).
- Remove the sensor and wire.