Front Suspension: Spring: Removal

Fig 1: Spring Compressor

Courtesy of DAIMLERCHRYSLER CORP.

1 - SPRING COMPRESSOR

2 - SPRING

1. Remove the shock (Refer to SUSPENSION/FRONT/SHOCK - REMOVAL) .
2. Install the shock assembly in the Branick 7200® spring removal/installation tool or equivalent (1).
3. Compress the spring (2).
   Fig 2: Shock Orientation

   Courtesy of DAIMLERCHRYSLER CORP.
4. Remove the upper shock nut (2).
   NOTE: The nub (1) in the upper shock mount (3) must be 180° from the centerline of the lower bracket (9) on the shock (8) for proper installation.
5. Remove the shock (8).
6. Remove the shock upper mount (3).
7. Remove and inspect the upper (5) and lower (7) spring isolators.