Module-Final Drive Control: Removal

Fig 1: Rear Seat In Up Position

Courtesy of DAIMLERCHRYSLER CORP.

1. Disconnect and isolate the battery negative cable.
2. Lift up rear seat to expose the park assist module and final drive control module.
   Fig 2: Removing/Installing Module Electrical Connector

   Courtesy of DAIMLERCHRYSLER CORP.
3. Disconnect the module electrical connector (1).
4. Using a trim stick (special tool #C-4755) or equivalent, gently pry back on the retaining tabs on the mounting plate (2) and remove module.