Hard Wired Inputs

The hard wired inputs to the BCM include the following:

• A/C on/off control 
• BCM flash enable 
• Door lock switch MUX 
• Driver door ajar switch sense 
• Flip-up glass ajar switch sense 
• Flip-up glass release switch sense 
• Front fog lamp switch sense 
• Front wiper park switch sense 
• Front wiper switch MUX 
• Fused B(+) 
• Fused ignition switch output (run-acc) 
• Fused ignition switch output (run-start) 
• Headlamp switch MUX 
• High beam switch sense 
• Hood ajar switch sense - with VTSS - in markets where required only 
• Key-in ignition switch sense 
• Left rear door ajar switch sense 
• Lightbar switch sense - Renegade with light bar only 
• Panel lamps dimmer switch MUX 
• Passenger front door ajar switch sense 
• Radio control MUX - with remote radio switches only 
• Rear courtesy lamp control 
• Rear window defogger control 
• Rear wiper intermittent driver 
• Rear wiper on driver 
• RHD input - connected to ground on right-hand drive models only 
• Right rear door ajar switch sense 
• Tailgate ajar switch sense 
• Washer pump driver 
• Vehicle speed signal 

Refer to the appropriate wiring information for additional details.