FixVault
Home › Jeep › 2006 › Liberty Renegade, 4WD, Part Time, Standard › Repair and Diagnosis › Transmission › Automatic Trans › Engine & Automatic Transmission Cooling System › Engine › Engine Coolant Temperature Sensor › Installation › 2.8L Diesel Engine

2.8L Diesel Engine

  1. Install coolant temperature sensor in thermostat housing.
  2. Connect coolant temperature sensor electrical connector.
  3. Refill cooling system to proper level. Refer to REFILLING COOLING SYSTEM .
  4. Connect negative battery cable.
About FixVault