FixVault
Home › Jeep › 2006 › Liberty Renegade, 4WD, Part Time, Standard › Repair and Diagnosis › Transmission › Automatic Trans › Engine & Automatic Transmission Cooling System › Engine › Inspection › Installation › 3.7L Engine

3.7L Engine

  1. Assemble fan blade to viscous fan drive. Tighten mounting bolts to 23.7 N.m (210 in. lbs.) torque.
    NOTE: The viscous fan and fan shroud must be installed as an assembly.
  2. Gently lay viscous fan into fan shroud.
  3. Install the fan shroud to radiator mounting bolts. Tighten bolts to 9 N.m (80 in.lbs).
  4. Thread the fan and fan drive onto the water pump pulley, and tighten nut using special tool 6958 spanner wrench and 8346 adapters.
  5. Install accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION) .
CAUTION: When installing a serpentine accessory drive belt, the belt MUST be routed correctly. If not, the engine may overheat due to the water pump rotating in the wrong direction. (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL)  for correct belt routing.
About FixVault