FixVault
Home › Jeep › 2006 › Wrangler Rubicon, Automatic › Repair and Diagnosis › Suspension › Wheel Alignment › Suspension System › Front › Stabilizer Bar › Installation

Stabilizer Bar: Installation

  1. Center stabilizer bar on top of the frame rails and install retainers and bolts. Tighten bolts to 61 N.m (45 ft. lbs.).
  2. Position links on axle brackets and into the stabilizer bar. Install lower link bolts and nuts and tighten to 102 N.m (75 ft. lbs.).
  3. Install upper link nuts and tighten to 61 N.m (45 ft. lbs.).
  4. Install bumper valence.
About FixVault