Frame & Bumpers: Bumpers: Fascia-Rear: Removal: Fascia-Rear

Fig 1: Rear Fascia & Fasteners

Courtesy of CHRYSLER LLC

1. Open the liftgate.
2. Remove the four push pin fasteners (1) and 2 screws (2) at the step pad area.
   Fig 2: Rear Fascia To Wheel Liners & Fasteners

   Courtesy of CHRYSLER LLC
3. Remove the plastic rivets at the wheel wells (1).
4. Remove the two push pin fasteners and remove the rear wheel splash shields.
   Fig 3: Fascia To Quarter Panel

   Courtesy of CHRYSLER LLC
5. Remove the nuts (1) at the back sides of the quarter panels (2).
   Fig 4: Rear Fascia To Wheel Liners & Fasteners

   Courtesy of CHRYSLER LLC
6. Remove the fascia (8) and disconnect the electrical connector (6 & 7).
   Fig 5: Identifying Lower Rear Fascia & Fasteners

   Courtesy of CHRYSLER LLC
7. Remove the two push pin fasteners (3).
8. Remove the four push pin fasteners and the energy absorber.
9. Disconnect the park assist electrical sensors.
10. Remove the park assist sensors.