FixVault
Home › Jeep › 2007 › Commander Base, 3.7 K, AWD › Repair and Diagnosis › Engine Mechanical › Mechanical › 3.7L Engine (Service Information) › Engine Mounting › Mount-Engine Front › Installation › Engine Mount

Engine Mount

Fig 1: Removing/Installing Engine Mount
GC0027232Courtesy of CHRYSLER LLC
  1. Install the engine mount (1).
  2. Tighten the bolts to 30 N.m (22 ft.lbs.).
  3. Lower the engine.
  4. Install the through bolts and nuts.
  5. Lower vehicle.
  6. Connect negative battery cable.
About FixVault