FixVault
Home › Jeep › 2007 › Commander Base, 4.7 N, AWD › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Injection - Gas › Motor-Idle Air Control › Installation › Idle Air Control Motor

Idle Air Control Motor

Fig 1: Locating Idle Air Control Motor & TPS - 3.7L V-6
GC0006577Courtesy of CHRYSLER LLC
  1. Install IAC motor (2) to throttle body. See Fig 1.
  2. Install and tighten two mounting bolts (screws) to 7 N.m (60 in. lbs.) torque (4).
  3. Install electrical connector.
  4. Install air resonator to throttle body.
About FixVault