Fuel Tank

Fig 1: Fuel Filler Tubes And Hoses To Fuel Tank

Courtesy of CHRYSLER LLC

Release fuel system pressure. See STANDARD PROCEDURE .
Drain fuel tank.
Loosen clamp (9) and disconnect rubber fill hose (3) at tank fitting (7).

Fig 2: Fuel Tank Fuel/EVAP Lines
Courtesy of CHRYSLER LLC
At rear of tank, disconnect fuel pump module electrical jumper connector (5) from body connector (6).
At rear of tank, disconnect EVAP lines (2) and (3) from lines (1) and (4).
At front of tank, disconnect fuel and EVAP lines (9) and (10) from lines (11) and (12).
Support tank with a hydraulic jack.

Fig 3: Fuel Tank Mounting
Courtesy of CHRYSLER LLC
Remove bolts (1) and (2) at right side of fuel tank.
Remove bolts (3) at left side of fuel tank.
Lower tank for removal.
If fuel tank is to be replaced, remove fuel pump module from tank. See REMOVAL .