FixVault
Home › Jeep › 2007 › Commander Overland, RWD › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Injection - Diesel › Sensor-Camshaft Position › Installation › Camshaft Position Sensor

Camshaft Position Sensor

Fig 1: Locating CMP Sensor
GC0039517Courtesy of CHRYSLER LLC
  1. Install camshaft position sensor and tighten bolt to 8 N.m (71 in. lbs.).
  2. Reconnect electrical connector.
  3. Install engine cover.
  4. Reconnect negative battery cable.
About FixVault