FixVault
Home › Jeep › 2007 › Commander Overland, RWD › Repair and Diagnosis › Engine Mechanical › Mechanical › 5.7L Engine (Service Information) › Engine Mounting › Mount-Rear › Removal › Rear Engine Mount › 4X2

Rear Engine Mount: 4X2

Fig 1: Removing/Installing Engine Rear Mount (4X2)
GC0027233Courtesy of CHRYSLER LLC
  1. Raise the vehicle on a hoist.
  2. Using a suitable jack, support transmission.
  3. Remove the crossmember.
  4. Remove the fasteners (1) from the transmission mount to transmission.
  5. Remove the mount (3).
  6. Remove the transmission mount bracket (2), if required.
About FixVault