FixVault
Home › Jeep › 2007 › Commander Overland, RWD › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection - Diesel › Sensor-Camshaft Position › Removal › Camshaft Position Sensor

Camshaft Position Sensor

Fig 1: Locating CMP Sensor
GC0039517Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable. Refer to REMOVAL .
  2. Remove engine cover.
  3. Disconnect camshaft position sensor electrical connector.
  4. Remove retaining bolt and remove sensor.
About FixVault