FixVault
Home › Jeep › 2007 › Commander Overland, RWD › Repair and Diagnosis › Suspension › Wheel Alignment › Suspension System (Service Information) › Front › Stabilizer Link › Removal › Stabilizer Link

Stabilizer Link

Fig 1: Identifying Stabilizer Link, Tie Rod End & Clevis Bolt
GC0026784Courtesy of CHRYSLER LLC
  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the upper link bolt/nut (1&2).
  4. Remove the lower link bolt (6).
  5. Remove the stabilizer link (3).
About FixVault