FixVault
Home › Jeep › 2007 › Compass Limited, AWD, Automatic CVT › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System (Service Information) › Electrical › Sensor-Dynamics (Esp) › Removal › Dynamics Sensor

Dynamics Sensor

  1. Disconnect and isolate the battery negative cable from the battery post.
  2. Remove the shifter housing center console. Refer to REMOVAL .
    Fig 1: DYNAMICS SENSOR
    GC0053093Courtesy of CHRYSLER LLC
  3. Disconnect the wiring harness connector (3) at the dynamics sensor (1).
  4. Remove the nuts (2) mounting the dynamics sensor to the floor pan tunnel (4).
  5. Remove the dynamics sensor (1).
About FixVault