FixVault
Home › Jeep › 2007 › Compass Limited, AWD, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (2.0L Engine (Service Information)) › Engine Mounting › Mount-Right › Installation › Engine Mount - Right

Engine Mount - Right

WARNING: This page is about a different variant/trim than selected.
Fig 1: Right Mount
GC0054709Courtesy of CHRYSLER LLC
  1. Position right engine mount (1).
  2. Install engine mount retaining bolts and tighten to 75 N.m (55 ft. lbs.).
  3. Install engine mount adapter (2) and tighten bolts (3) to 68 N.m (50 ft. lbs.).
  4. Install engine mount through bolt (4) and tighten to 88 N.m (65 ft. lbs.).
    Fig 2: Power Steering Line Support Bracket
    GC0054710Courtesy of CHRYSLER LLC
  5. Remove jack.
  6. Install power steering line support bracket (1) at engine mount.
    Fig 3: Coolant Reservoir
    GC0054711Courtesy of CHRYSLER LLC
  7. Install windshield washer bottle (1).
  8. Install power steering reservoir (2).
  9. Install coolant reservoir (3).
  10. Install engine cover.
About FixVault