FixVault
Home › Jeep › 2007 › Grand Cherokee SRT-8 › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Module-Engine Control › Removal › Engine Control Module (ECM)

Engine Control Module (ECM)

  1. Remove the battery. Refer to REMOVAL .
  2. Remove the battery tray. Refer to REMOVAL .
    Fig 1: ECM Hold Down Bolts
    GC0058456Courtesy of CHRYSLER LLC
  3. Disconnect Engine Control Module (ECM) electrical connectors (2).
  4. Remove the two ECM hold down bolts (1).
    Fig 2: Identifying ECM, Bracket & Hold Down Bolts
    GC0058457Courtesy of CHRYSLER LLC
  5. Pull the ECM (1) from the bracket (3).
  6. Remove the ECM from the vehicle.
About FixVault