FixVault
Home › Jeep › 2007 › Grand Cherokee SRT-8 › Repair and Diagnosis › Electrical › Gauges › Navigation System & Telecommunication System (Service Information) › Navigation/Telecommunication - Service Information › Module-Hands Free › Removal › Module-Hands Free

Module-Hands Free

Fig 1: Removal & Installation Of Electrical Harness Connector
GC0029272Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the right side cowl panel trim.
  3. Disconnect the electrical harness connector.
    Fig 2: Removal & Installation Of Mounting Bracket Fasteners
    GC0029271Courtesy of CHRYSLER LLC
  4. Remove the mounting bracket fasteners.
  5. Remove the hands free module fasteners from the mounting bracket and remove module.
About FixVault