Suspension System: Front: Hub/Bearing: Installation

Fig 1: Removing/Installing Wheel Speed Sensor

Courtesy of CHRYSLER LLC

1. Install the hub bearing (3) to the knuckle.
2. Install the hub bearing to knuckle and the 3 bolts then tighten to 115 N.m (85 ft. lbs.).
3. Install the wheel speed sensor. Refer to INSTALLATION .
4. Install the wheel speed sensor nut (2).
   Fig 2: Disc Brake Rotor Hub & O-Ring

   Courtesy of CHRYSLER LLC

   1 - ROTOR

   2 - O-RING

5. Install the brake rotor (1). Refer to INSTALLATION .
   Fig 3: Caliper Adapter

   Courtesy of CHRYSLER LLC

   1 - CALIPER ADAPTER

   2 - KNUCKLE

   3 - CALIPER ADAPTER BOLTS

   4 - ROTOR

6. Install the brake caliper adaptor (1). Refer to INSTALLATION .
   Fig 4: Removing/Installing Caliper

   Courtesy of CHRYSLER LLC
7. Install the caliper (1). Refer to INSTALLATION .
8. Install the wheel and tire assembly. Refer to STANDARD PROCEDURE .
9. Remove the support and lower the vehicle.