FixVault
Home › Jeep › 2007 › Liberty Limited, RWD › Repair and Diagnosis › Engine Performance › Ignition Systems › Module-Glow Plug › Installation › Glow Plug Module

Glow Plug Module

Fig 1: Glow Plug Module
GC0026419Courtesy of CHRYSLER LLC
1 - MASTER CYLINDER
2 - GLOW PLUG MODULE
3 - BATTERY
  1. Connect the glow plug wiring harness connector.
  2. Secure the relay onto the inner fender well.
  3. Connect the negative battery cable.
About FixVault