FixVault
Home › Jeep › 2007 › Wrangler X, Automatic › Repair and Diagnosis › Suspension › Wheel Alignment › Suspension System (Service Information) › Front › Spring › Removal › Coil Spring

Coil Spring

  1. Raise and support the vehicle.
  2. Remove the wheel and tire assemblies.
  3. Position a hydraulic jack under the axle to support it.
  4. Remove the front shocks at the lower mountings. See REMOVAL .
  5. Remove lower suspension arms mounting nuts and bolts from the frame. See REMOVAL .
  6. Remove the track bar from the axle bracket. See REMOVAL .
  7. Remove the right side of the drag link from the right side knuckle. Refer to REMOVAL .
  8. Lower the axle until the spring is free from the upper mount.
    NOTE: Rotation of the spring and prying down slightly on the axle will aid in removal.
  9. Remove the upper spring isolator. (if needed)
  10. Pull jounce bumper out of mount. (if needed)
About FixVault