Rocker Arms

Fig 1: Using Remover/Installer 8516 To Press Downward On Valve Spring & Remove Rocker Arm

Courtesy of CHRYSLER LLC

NOTE: Disconnect the battery negative cable to prevent accidental starter engagement.

Remove the cylinder head cover. See REMOVAL
For rocker arm removal on cylinder No. 4, Rotate the crankshaft until cylinder No. 1 is at BDC intake stroke.
For rocker arm removal on cylinder No. 1, Rotate the crankshaft until cylinder No. 1 is at BDC combustion stroke.
For rocker arm removal on cylinders No. 3 and No. 5, Rotate the crankshaft until cylinder No. 1 is at TDC exhaust stroke.
For rocker arm removal on cylinders No. 2 and No. 6, Rotate the crankshaft until cylinder No. 1 is at TDC ignition stroke.
Using the Remover/Installer 8516 (2), press downward on the valve spring, remove rocker arm.