FixVault
Home › Jeep › 2008 › Commander Base, 3.7 K, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Engine & Automatic Transmission Cooling System › Engine › Fan-Radiator › Installation › Installation-3.7L/4.7L

Engine & Automatic Transmission Cooling System: Engine: Fan-Radiator: Installation: Installation-3.7L/4.7L

  1. Position fan assembly on shroud.
  2. Install fan to fan shroud mounting nuts. Tighten to 6 N.m (50 in. lbs.).
  3. Position fan and shroud assembly in vehicle.
  4. Install shroud mounting bolts. Tighten to 6 N.m (50 in. lbs.)
  5. Connect electric fan electrical connector.
  6. Start engine and check fan operation.
About FixVault