FixVault
Home › Jeep › 2008 › Commander Limited, 5.7 2, RWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Infotainment › Navigation System & Telecommunication System (Service Information) › Navigation/Telecommunication - Service Information › Module-Hands Free › Removal › Module-Hands Free

Module-Hands Free

Fig 1: Removing/Installing Electrical Harness Connector & Mounting Bracket Fasteners
GC0029272Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the right side cowl panel trim.
  3. Disconnect the electrical harness connector.
    Fig 2: Removing/Installing Electrical Harness Connector & Mounting Bracket Fasteners
    GC0029271Courtesy of CHRYSLER LLC
  4. Remove the mounting bracket fasteners.
  5. Remove the hands free module fasteners from the mounting bracket and remove module.
About FixVault