FixVault
Home › Jeep › 2008 › Compass Limited, AWD, Standard › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Injection-Diesel › Accelerator Pedal Position Sensor › Removal › Pedal - Accelerator

Pedal - Accelerator

Fig 1: Locating Pedal & Accelerator Pedal Position (APPS) Sensor
GC0055475Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable at battery.
  2. Disconnect the electrical connector from accelerator pedal.
  3. Remove mounting nuts and remove accelerator pedal from the mounting studs.
About FixVault