FixVault
Home › Jeep › 2008 › Compass Limited, FWD, Standard › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection-Diesel › Boost Pressure Sensor › Removal › Removal

Boost Pressure Sensor: Removal: Removal

  1. Disconnect negative battery cable.
  2. Remove the belly pan.
    Fig 1: Remove/Install Pedal And APPS Sensor
    GC0055506Courtesy of CHRYSLER LLC
  3. Disconnect the electrical connector (1) from the boost pressure sensor (3).
  4. Remove the 2 mounting bolts (2).
  5. Remove the boost pressure sensor (3) from the charge air tube (4).
About FixVault