FixVault
Home › Jeep › 2008 › Compass Limited, FWD, Standard › Repair and Diagnosis › Suspension › Front Suspension › Suspension System › Wheel Alignment › Standard Procedure › Wheel Alignment › Toe › Rear Toe

Rear Toe

NOTE: Perform the following at each rear wheel as necessary.
Fig 1: Rear Toe Adjustment Cam Bolt
GC0052905Courtesy of CHRYSLER LLC
  1. While holding the cam bolt head (3) stationary, loosen the toe link mounting cam bolt nut (1).
  2. Rotate the cam bolt head (3) left or right until the rear wheel toe for that rear wheel is set to the preferred specification. See SPECIFICATIONS .
  3. While holding the cam bolt head (3) stationary, tighten the toe link mounting cam bolt nut (1) to 35 N.m (26 ft. lbs.).
  4. Remove the steering wheel clamp.
  5. Remove the alignment equipment.
  6. Road test the vehicle to verify the steering wheel is straight and the vehicle does not pull or wander.
About FixVault