FixVault
Home › Jeep › 2008 › Wrangler Sahara, Standard › Repair and Diagnosis › Engine Performance › System › DTCS P2161 To U110F › U0141-Lost Communication With Front Control Module (TIPM) › Diagnostic Test

Diagnostic Test

  1. ACTIVE DTC 

    Ignition on, engine not running.

    With a scan tool, select View PCM DTCs.

    Is the DTC Active at this time? 

    Yes 

    1. Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING for diagnostic procedures and for further possible causes.

    No 

    1. Refer to the INTERMITTENT CONDITION Diagnostic Procedure.
    2. Perform POWERTRAIN VERIFICATION TEST .
About FixVault