FixVault
Home › Jeep › 2009 › Commander Overland, 4WD › Repair and Diagnosis › External Pages › Different car › Section 102 (Ignition Control (Service Information)) › PLUG, Glow › Installation › Installation

PLUG, Glow: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install glow plug. Tighten glow plugs to 12 Nm (106 lbs. in.).
  2. Connect glow plug electrical connector (1).
  3. Install engine cover. Refer to Engine - Installation .
  4. Connect negative battery cable.
About FixVault