SENSOR, Camshaft Position: Installation: 5.7L/6.1L

Fig 1: Sensor & Sensor Mounting Bolt

Courtesy of CHRYSLER LLC

1. Clean out machined hole in timing gear/chain cover.
2. Install sensor (2) into timing gear/chain cover with a slight rocking action. Do not twist sensor into position as damage to O-ring may result.
   CAUTION: Before tightening sensor mounting bolt, be sure sensor is completely flush to timing gear/chain cover. If sensor is not flush, damage to sensor mounting tang may result.
3. Install mounting bolt (3) and tighten to 12 N.m (106 in. lbs.).
   Fig 2: Camshaft Position Sensor

   Courtesy of CHRYSLER LLC
4. Connect electrical connector (4) to sensor (1).
5. Install air resonator and tighten clamps.