Right Side
NOTE:
All torques should be done with vehicle on the ground with full vehicle weight.
| 1 - NUT |
| 2 - UPPER SUSPENSION ARM |
| 3 - UPPER SPRING ISOLATOR |
| 4 - JOUNCE BUMPER RETAINER |
| 5 - BOLT |
| 6 - JOUNCE BUMPER |
| 7 - UPPER FLAG BOLT |
| 8 - LOWER FLAG BOLT |
| 9 - LOWER SUSPENSION ARM |
- Position the upper suspension arm (2) in the frame rail bracket.
- Install the mounting bolt (7) and nut (1) tighten to 129 N.m (95 ft. lbs.).
1 - ISOLATOR 2 - NUT 3 - BOLT 4 - UPPER SUSPENSION ARM - Position the upper suspension arm (4) in the axle bracket.
- Install the mounting bolt (3) and nut (2) tighten to 136 N.m (100 ft. lbs.).
- Remove the supports and lower the vehicle.