FixVault
Home › Jeep › 2009 › Compass Limited, EDG, Standard › Repair and Diagnosis › Engine Performance › Ignition System › Ignition Control (Service Information) › SOLENOID, Variable Valve Timing › Removal › Rear Solenoid 1/2

Rear Solenoid 1/2

Fig 1: SOLENOID LOCATION 1/2
GC0082440Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Remove engine cover.
  3. Disconnect variable valve timing solenoid electrical connector.
  4. Remove variable valve timing solenoid mounting bolt.
    Fig 2: SOLENOID MOUNTING TAB 1/2
    GC0082441Courtesy of CHRYSLER LLC
  5. Pull solenoid straight out of cylinder head.
About FixVault