FixVault
Home › Jeep › 2009 › Liberty Limited, 4WD, Part Time › Repair and Diagnosis › Suspension › Wheel Alignment › Front Suspension › Front › ARM, Upper Control › Removal › Right Side

Right Side

  1. Raise and support the vehicle.
  2. Remove the right side tire and wheel assembly.
  3. Remove the upper ball joint nut.
    Fig 1: UPPER BALL JOINT SEPARATION
    GC0085698Courtesy of CHRYSLER LLC
  4. Separate the upper ball joint from the steering knuckle (3) using remover 9360 (2).
  5. Lower the vehicle.
  6. Remove the air box assembly. Refer to Engine/Air Intake System/AIR CLEANER - Removal .
  7. Remove the upper control arm rear bolt/nut.
  8. Remove the upper control arm front bolt/nut.
  9. Remove the upper control arm from the vehicle.
About FixVault