Diagnostic Test

STEERING COLUMN CONTROL MODULE DTCS PRESENT
1. Ignition on, engine not running.
2. With the scan tool, read DTCs in the Steering Column Control Module.
  Are there any DTCs present?
  
  Yes
  - Perform the appropriate diagnostic procedure.
  - Perform the FDCM VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Final Drive Control (FDCM) - Standard Procedure .
  No
  - Replace the Final Drive Control Module in accordance with the Service Information.
  - Perform the FDCM VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Final Drive Control (FDCM) - Standard Procedure .