SENSOR, Camshaft Position: Removal: Rear

Fig 1: Identifying Camshaft Position Sensor Heat Shield - Remove/Install

Courtesy of CHRYSLER LLC

1. Disconnect negative battery cable.
2. Disconnect electrical connector at sensor.
3. Remove nut retaining heat shield.
   Fig 2: Identifying Camshaft Position Sensor Heat Shield - Remove/Install

   Courtesy of CHRYSLER LLC
4. Pull heat shield out to uncover sensor.
5. Remove mounting bolt.
   Fig 3: Removing/Installing Camshaft Position Sensor

   Courtesy of CHRYSLER LLC
6. Remove sensor.