FixVault
Home › Jeep › 2010 › Liberty Renegade, Part Time › Repair and Diagnosis › Suspension › Wheel Alignment › Front Suspension › Front › ARM, Upper Control › Removal › Right Side

Right Side

  1. Raise and support the vehicle.
  2. Remove the right side tire and wheel assembly.
  3. Remove the upper ball joint nut.
    Fig 1: UPPER BALL JOINT SEPARATION
    GC0085698Courtesy of CHRYSLER LLC
  4. Separate the upper ball joint from the steering knuckle (3) using BALL JOINT REMOVER - 9360 (2).
  5. Lower the vehicle.
  6. Remove the air box assembly.
  7. Remove the upper control arm rear bolt/nut.
  8. Remove the upper control arm front bolt/nut.
  9. Remove the upper control arm from the vehicle.
About FixVault