Diagnostic Test

VERIFY THAT DTC B2102-IGNITION RUN/START INPUT CIRCUIT HIGH IS ACTIVE
NOTE:
Make sure the battery is fully charged.
1. Turn the ignition on.
2. With the scan tool, read Occupant Restraint Controller (ORC) DTCs.
  Does the scan tool display active: B2102-IGNITION RUN/START INPUT CIRCUIT HIGH?
  
  Yes
  - Go To 2.
  No
  - Perform the AIRBAG SYSTEM INTERMITTENT TEST procedure. Refer to Standard Procedure .
CHECK FOR CHARGING SYSTEM RELATED DTCs IN THE POWERTRAIN CONTROL MODULE (PCM)
1. With the scan tool in ECU View, select PCM and check for any Charging System related DTCs.
  Does the scan tool display any Charging System related DTCs?
  
  Yes
  - Diagnose and repair the ECM/PCM DTCs and perform the appropriate verification test procedure. Refer to 3.7L - NGC - DIAGNOSTIC CODE INDEX .
  No
  - Replace the ORC in accordance with the Service Information.
  - Perform the AIRBAG SYSTEM VERIFICATION TEST. Refer to AIRBAG SYSTEM VERIFICATION TEST .