Control Circuit Testing
WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
The starter control circuit components should be tested in the order in which they are listed, as follows:
- Starter Relay - Refer to Starter Relay The starter relay is located within the PDC. Refer to DIAGNOSIS AND TESTING .
- Starter Solenoid - Refer to STANDARD STARTING SYSTEM Diagnosis and Testing.
- Ignition Switch - Refer to SWITCH, IGNITION
- Clutch Pedal Position Switch - If equipped with manual transmission, refer to appropriate information for Clutch Pedal Position Switch .
- Park/Neutral Position Switch - If equipped with automatic transmission, refer to appropriate transmission information .
- Wire harnesses and connections - Refer to appropriate Wiring Diagrams.