5.7L Dual Fan

WARNING: This page is about a different car, the 2012 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable.
Remove the air filter housing assembly. Refer to BODY, AIR CLEANER, REMOVAL or BODY, AIR CLEANER, REMOVAL, 5.7L or BODY, AIR CLEANER, REMOVAL .
Raise and support vehicle.
If equipped, remove the lower closeout panel.
Drain the coolant into a clean container. Refer to STANDARD PROCEDURE .
If equipped, install the lower closeout panel.
Lower vehicle.

Fig 1: Upper Radiator Hose
Courtesy of CHRYSLER GROUP, LLC
Remove the upper radiator hose (2).

Fig 2: Cooling Fan Electrical Connector, Cooling Fan Mounting Bolts & Radiator Cooling Fan Assembly
Courtesy of CHRYSLER GROUP, LLC
Disconnect the cooling fan electrical connector (1).
Remove the cooling fan mounting bolts (2).
Using care. Remove the radiator cooling fan assembly (3) from vehicle.

Fig 3: Fan Motor Wiring Harness, Fan Shroud, Fan Blade & Bolts
Courtesy of CHRYSLER GROUP, LLC
Removing the fan motor wiring harness (5) from the fan shroud (6).
Remove the fan blade (4) from the fan motor.
Remove the bolts (2) that support the fan motor to the shroud.