Sensor, Air Temperature, Inlet: Installation: 3.6L

WARNING: This page is about a different car, the 2012 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of IAT Sensor Tab/O-Ring - 3.7L/4.7L/5.7L

Courtesy of CHRYSLER GROUP, LLC

The Inlet Air Temperature (IAT) sensor O-ring seal (2) can be reused if not damaged.
Clean the IAT sensor mounting hole in the air inlet hose.
Install the IAT sensor into the air inlet hose and rotate clockwise until the release tab (3) engages.

Fig 2: Inlet Air Temperature Sensor Electrical Connector
Courtesy of CHRYSLER GROUP, LLC
Install the electrical connector (1) to the IAT sensor.

Fig 3: Engine Cover
Courtesy of CHRYSLER GROUP, LLC
Position the engine cover (1) and secure the retaining grommets onto the ball studs.

Fig 4: Negative Battery Cable
Courtesy of CHRYSLER GROUP, LLC
Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).