Heater, Engine Block: Removal: Removal
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - POWER CORD |
| 2 - BLOCK HEATER |
| 3 - CORE HOLE |
- Drain cooling system. Refer to STANDARD PROCEDURE .
- Raise vehicle on hoist.
- Detach power cord plug (1) from block heater (2).
- Loosen screw in center of block heater (2). Remove heater assembly (2) from engine block's core hole (3).