FixVault
Home › Jeep › 2012 › Compass Limited, AWD, Standard › Repair and Diagnosis › External Pages › Different car › Section 380 (Electronic Control Modules (Service Information)) › Module, Power Sunroof › Module Programming › Dual Pane Sunroof Or Sunshade Obstacle Detection Update › Sliding Glass

Sliding Glass

WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Be certain the power sunshade is in the fully open position.
  2. Depress the VENT push button of the sunroof switch so that the sliding glass panel travels to the fully vented position.
  3. Depress the CLOSE push button of the sunroof switch so that the sliding glass panel travels to the fully closed position.
  4. Depress the OPEN push button of the sunroof switch so that the sliding glass panel travels to the fully opened position.
  5. Depress the CLOSE push button of the sunroof switch so that the sliding glass panel travels to the fully closed position.
  6. Repeat Steps 2 through 5 for at least 5 complete sliding glass panel cycles (VENT, CLOSE, OPEN, CLOSE).
About FixVault