6.2L Single Fan
WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When installing the cooling fan assembly. Care must be used so that the fan shroud does not contact the radiator or the radiator fins. Damaged may cause leaking.
- Install the cooling fan assembly (1). Tighten bolts to the proper specification. Refer to SPECIFICATIONS .
- Connect the cooling fan wire harness connector (2).
- Install the water pump. Refer to PUMP, WATER, INSTALLATION .
- Connect the negative battery cable.
- Operate the engine until it reaches normal operating temperature. Check the fan for proper operation.