Switch, Lock: Installation
WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Position the front door switch module close enough to the mounting hole in the armrest of the front door trim panel to access and connect the wire harness connector (1) to the switch module connector receptacle.
- Align the switch module to the armrest mounting opening.
- Using hand pressure, press the switch module firmly and evenly into the mounting hole until the all of the spring steel retainers of the switch module are fully engaged and the switch module bezel is fully seated against the armrest.
- Connect the battery negative cable.