Control Circuit Testing
WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
The starter control circuit components should be tested in the order in which they are listed, as follows:
- Starter Relay - The starter relay is located within the PDC. Refer to CENTER, POWER DISTRIBUTION (PDC) .
- Starter Solenoid - Refer to DIAGNOSIS AND TESTING .
- Ignition Switch - Refer to Ignition Switch and Key Lock Cylinder
- Clutch Pedal Position Switch - If equipped with manual transmission, refer to Clutch Pedal Position Switch .
- Park/Neutral Position Switch - If equipped with automatic transmission, refer to Park/Neutral Position Switch
- Wire harnesses and connections - Refer to Refer to the appropriate system wiring diagram.