Module, Radio Antenna: Installation: Module
WARNING: This page is about a different car, the 2020 Chrysler 300 and 2019 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Engage the mounting tab of the antenna module (2) into the slotted hole in the upper right C-pillar (1).
- Install and tighten the fastener (3) that secures the antenna module to the C-pillar. Tighten the fastener securely.
- Connect the wire harness connector (4) to the antenna module.
- Install the trim onto the upper right C-pillar. Refer to PANEL, C-PILLAR TRIM, INSTALLATION .
- Connect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.