Torque Specifications
WARNING: This page is about a different car, the 2012 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE CHART 5.7L ENGINE
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Block Pipe Plugs (1/4 NPT) |
20 | 15 | - |
| (3/8 NPT) | 27 | 20 | - |
| Camshaft Sprocket Bolt | 122 | 90 | - |
| Camshaft Tensioner Plate Bolts | 28 | 21 | - |
| Coil to Cylinder Head Cover Bolts | 7 | - | 62 |
| Timing Chain Case Cover Bolts | 28 | 21 | - |
| Lifting Stud | 55 | 41 | - |
| Connecting Rod Cap Bolts | 21 plus 90° Turn |
15 plus 90° Turn |
- |
| Main Bearing Cap Bolts - M12 | 28 plus 90° Turn |
20 plus 90° Turn |
- |
| Crossbolts - M8 | 31 | 23 | - |
| Cylinder Head Bolts - M12 | |||
| Step 1 | 34 | 25 | - |
| Step 2 | 54 | 40 | - |
| Step 3 | Turn 90° | Turn 90° | - |
| M8 Bolts | |||
| Step 1 | 20 | 15 | - |
| Step 2 | 34 | 25 | - |
| Cylinder Head Cover Bolts | 8 | - | 71 |
| Exhaust Manifold to Cylinder Head | 25 | 18 | - |
| Flexplate to Crankshaft Bolts | 95 | 70 | - |
| Flywheel to Crankshaft Bolts | 75 | 55 | - |
| Front Insulator Through bolt/nut | 95 | 70 | - |
| Front Insulator to Block Bolts | 95 | 70 | - |
| Generator Mounting Bolt | 55 | 41 | - |
| Intake Manifold Bolts | 12 | 9 | - |
| Lifter Guide Holder | 12 | 9 | - |
| Oil Pan Bolts | 12 | 9 | - |
| Oil Dipstick Tube | 12 | 9 | - |
| Oil Pan Drain Plug | 27 | 20 | - |
| Oil Pump Attaching Bolts | 28 | 21 | - |
| Oil Pump Pickup Tube Bolt and Nut | 28 | 21 | - |
| Rear Seal Retainer Attaching Bolts | 15 | 11 | - |
| Rear Insulator to Bracket | 68 | 50 | - |
| Rear Insulator to Crossmember | 41 | 30 | - |
| Rear Insulator to Transmission | 68 | 50 | - |
| Rear Insulator Bracket Bolts | 68 | 50 | - |
| Rocker Arm Bolts | 22 | 16 | - |
| Thermostat Housing Bolts | 13 | - | 115 |
| Throttle Body Bolts | 12 | 9 | - |
| Vibration Damper Bolt | 176 | 130 | - |
| Water Pump to Timing Chain | 28 | 21 | - |
| Case Cover Bolts | 28 | 21 | - |