FixVault
Home › Jeep › 2012 › Compass Limited, FWD, Standard › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Module, Transmission Control › Standard Procedure › Standard Procedure - Transmission Control Module Initialization › Relearn, After Replacing A Transaxle

Relearn, After Replacing A Transaxle

  1. Turn ignition key to RUN.
  2. Clear learning memory using the scan tool.
  3. Turn the ignition key to OFF/LOCKED for 2 seconds.
  4. Turn the ignition key to RUN Clear DTCs.
  5. Turn the ignition key to OFF/LOCKED for 2 seconds.
  6. Turn ignition key to RUN.
  7. After at least 7 seconds, read DTCs.
  8. If DTCs resets. Refer to DIAGNOSIS AND TESTING .
About FixVault