Sensor, Fuel Pressure: Removal: Removal

Fig 1: Fuel Rail Pressure Regulator Harness Connector

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect the negative battery cable.
2. Remove the engine cover.
3. Disconnect the fuel rail pressure sensor harness connector (2).
   Fig 2: Lock Tabs & Engine Wire Harness

   Courtesy of CHRYSLER GROUP, LLC
4. Release the four lock tabs (1) lift up and position aside engine wire harness (2).
   Fig 3: Fuel Rail & Fuel Rail Pressure Sensor

   Courtesy of CHRYSLER GROUP, LLC
5. Remove the fuel rail pressure sensor (2) from fuel rail (1).